With LED lights you have to be sure you install them in the correct orientation as if you install them backwards they won't turn on. They won't get damaged but they won't work. Try reversing them in the socket you installed them and see if that fixes it. view full answer...
I looked up your 2009 Keystone Raptor 300MP and based on it's axle capacity the correct Equa-Flex cushioned equalizer you'd need is the part # LC279688 and then for a wet bolt kit to use with this the part # LC64FR would be what you'd need. view full answer...
For your 2017 Keystone Raptor 398TS, I recommend checking out the:
-MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase # MR59ZR.
These equalizers are designed to work with triple axle trailers with a 33" wheelbase and have up to an 8K axle capacity, like your Keystone Raptor.
Additionally, these equalizers are made in the USA, have an easy bolt-on installation, and will deliver a smoother ride by reducing the stress on the frame.
For your shackle... view full answer...
Yes the Hydrastar Disc Brake Kit for 7k axles part # HSE7K-T1SO fits Dexter and LCI/Lippert 7k axles as they use the same spindle dimensions and brake mounting flange dimensions. view full answer...
When looking for slide out toppers you need to make sure you get ones that have at least 2.5 inches of overhang on each side of the slide out.
For your two slide outs I recommend the Solera RV Slide-Out Awning - 8'7" Wide - 48" Projection - Black # LCV000168108 and the Solera RV Slide-Out Awning - 10'1" Wide - 48" Projection - Black # LCV000182037 view full answer...
It would the easiest if you just replaced the bolt you have with the part # 34007-187-00 which is the correct bolt replacement for your EZ Flex equalizer part # K71-358-00. The zerk fitting replacement info is not available. view full answer...
The SolidStep Manual Fold-Down Steps, # LC791572 is a three step version for an entry height of 27" to 36" and a door width of 25" to 28-7/8".
The # LC791574 is the four step version that has the same door width of 25" to 28-7/8" but is for an entry height of 35" to 44". I have listed each due to your entry height being listed at 36" and suggest the four step version, # LC791574 so that you have max availability of the adjustment options for the legs. Please note the product review... view full answer...
Because they are maintenance free, less expensive and easier to install than shocks, I'd definitely recommend going with the SumoSpring option. They'll work with your existing leaf spring suspension to help dampen the suspension, but will also reduce sway and body roll during turns. For a tandem axle application, you'll need two sets of the # TSS-107-40 which are compatible with 3000-5000 lb capacity axles.
As a bonus, the SumoSprings are also especially effective against porpoising, the... view full answer...
The leaf spring part # SP-053275 that you referenced is correct for a 6,000 lb axle like you have so it would work well in that regard. You would want to make sure the length of this will work too as it is 25-1/8 inches. Looks like your Lippert leaf spring is about 26 inches long so this would work great. view full answer...
I looked up the specs on your 2011 Keystone Raptor 361LEV and it looks like it is 39 feet, 7 inches long. For an all climate cover check out Adco's SFS AquaShed RV Cover for 5th Wheel Toy Hauler - Up to 40' Long Item # 290-52257 or Camco's UltraGuard 5th Wheel Cover - 40' Long Item # CAM45758. These are fantastic all around covers for any climate in the country. view full answer...
The HydraStar Disc Brake Kit w/ Actuator # HSE7K-TR1 does include the necessary hardware to attach the brake lines to the trailer, however they do not utilize c-clamp style rubber lines so these clamps are not in the kit.
In addition to this hardware, the HydraStar electric-over-hydraulic actuator, and the hub-and-rotor assemblies, this kit also includes the following components:
(1) 30' Long brake line - 3/16"
(1) 6' Long brake line - 3/16"
(4) 4-1/4" Long brake lines - 3/16"
(6) 18"... view full answer...
We do have a variety of 16" wheels that use the 8 on 6-1/2" bolt pattern for you.
I personally like the black wheel designs because they look more sleek so out of the linked selection I recommend checking out the Aluminum Bobcat Trailer Wheel # LHSO513B. This wheel is aluminum so it will do a fantastic job resisting the elements and then it has the nice silver design with the black base to really make the wheels stand out.
If you're needing tires as well I recommend the Westlake ST235/80R16... view full answer...
From previous questions I'm fairly certain your seal 212337313TB is the same as the # GS-2250DL which has an inner diameter of 2.250 inch and outer diameter of 3.376 inch. view full answer...
I checked with Lippert and asked if we could get just the part number you mentioned and they told me it's not available by itself. You'd need the entire assembly part # LC281154. view full answer...
Thanks to the item number from your current pin box my contact at Lippert was able to confirm that your 2018 Keystone Raptor 355TS has a Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1116 # LC176440 which has a 19000lb weight capacity and uses the 1116 bolt pattern.
You will need the Trailair Air Ride 5th Wheel Pin Box - Lippert 1116 # LC155943 is designed to replace your 1116 bolt pattern pin box and offers a 21000lb weight capacity. This pin box will offer a much smoother ride due to... view full answer...
Thanks for that excellent info, and we do have an option for you, though the Dexter E-Z Flex # K71-656-00 actually has two different size equalizers, one that is 7-1/4" long and the other that is 5-3/4" long (from bolt hole to bolt hole) so because yours are both just over 7" you'll need a different kit.
We do have exactly what you need with a kit from MORryde that offers a substantial suspension upgrade that will smooth out your ride. It is an equalizer upgrade as well, giving you rubber... view full answer...
The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box part # 325-GH-8045 can actually be made compatible with a Lippert 1116 Pin Box. That said, this pin is 12" wide and your pin box is 12-1/2" wide so you need 1/4" spacers to fill the gap. There is an exact spacer for this job but we do not carry it so you will need to reach out to Gen-Y for this, the ΒΌ" Filler Shims for EXECUTIVE 12.5" Wide part GH-8000. view full answer...